Nitto Drag Radials with Centerline Stingray III wheels

For sale: 1 pair of like new (2 runs) Nitto Drag Radials Size 305-45-18, mounted on new Centerline Stingray III 18x8 wheels. The tires sell for about $242 each and the wheels go for about $240 each at Summit. Total about $1033 with tax but before mounting and balancing. I would like to get maybe $650..... I will have them at the Famoso Race on 9-23-06, for anyone who wants to try before you buy. I would only recommend these for stock trucks, as I am at 526ftlbs to the rear wheels and I simply overpowered them. They are 28.8" tall and will have the effect of 4.48 gears if you have 4.10's and 4.98 gears if you have 4.56 gears as compared to the stock tires (31.5" tall).
Stock trucks will have no problem in the 1/4 mile in 4th gear with these tires. Top speed potential @ 6000 rpm with 4.10 gears is 125.4mph and with 4.56 gears the top is 112.8 @6000 rpm.

I tried to send a PM to 06-QUAD-SRT10, let me know if it went through.

Ill see you on the 23rd..
Cheers J.T.

Still for Sale!!! JT was a no show, hope everything is OK. What Happened?

Are these the ones you used on your 12.6 run?

JT had to do Family stuff....and no he ran on different tires...

silversrt said:

Are these the ones you used on your 12.6 run?

Click to expand...

Your going to need slicks! How the build going?:dontknow:

Hey Silversrt... No I didn't use these , I used an M&H 390-40-17 Drag Radial. Like I said I recommend these for STOCK trucks only, I am at 482 rwhp and 526 Ftlbs so I overpower the Nitto's.

sleeper said:

Your going to need slicks! How the build going?:dontknow:

Click to expand...

I was missing a pulley that goes on the factory tensioner,So I am waiting for it to get here from Paxton.Should be monday.Also I had to order a factory tensioner since i broke mine by turning the reverse threaded bolt the wrong way.I guess I should have waited to start the install at a later date.
Should be done by next weekend.:dontknow:

Trainman said:

Hey Silversrt... No I didn't use these , I used an M&H 390-40-17 Drag Radial. Like I said I recommend these for STOCK trucks only, I am at 482 rwhp and 526 Ftlbs so I overpower the Nitto's.

Click to expand...

I guess that means since I have the Paxton , they wouldnt work with my application.

Still for Sale!! Hey FastJack I tried to answer your PM , I hope it went through, but I haven't heard from you. There should be someone here in Calif that has a stock truck and needs a little extra traction. I'm in Bakersfield and I will be willing to meet you halfway if you are in Southern Cal or say as far North as Sacramento.