ABS and Brake light on. What could cause this?

2005ViperRam

Well-Known Member
Joined
Oct 13, 2012
Messages
151
Reaction score
268
So I finished up the front end suspension on my black 2005 QC.
I originally had these light on, which I thought was a faulty wheel bearing/hub, since I was getting a loud
“clunk”. So during my rebuild I ended up buying new Moog bearing/hubs.
The error lights went off for a few miles, but have came back, and now are on all the time.
I took the truck to AutoZone and had them use their scanner on it and get these codes:
01 - Left font sensor circuit failure
25 - Open sensor LF
40 -
56 -
73 - Inoperative watchdog inhibit
It doesn’t give any information on what part would cause this.
Any ideas?
 

Attachments

  • IMG_3644.jpeg
    IMG_3644.jpeg
    297.4 KB · Views: 4
Did you replace the abs sensors during your front end rebuild? Sorry if I should know that lol
 
Are the sensors integrated with the new hubs ? Are the sensors separately replaceable ?
Maybe a defective part !
 
Did you get the correct hubs? There are different hubs for 2 and 4 wheel ABS.
 
I put on Moog 515073. After reading this, I am unsure what I have. I think I have 4-wheel ABS. But the word “4-wheel” has me confused now for 4-wheel drive.
 

Attachments

  • IMG_3647.png
    IMG_3647.png
    290.4 KB · Views: 6
I put on Moog 515073. After reading this, I am unsure what I have. I think I have 4-wheel ABS. But the word “4-wheel” has me confused now for 4-wheel
Do the trucks have 4 wheel ABS or 2 wheel ? Knowing that should answer the question of which part #
 
Wonder if there is a difference between the QC brake and the RC brakes
 
I guess I could go look at the rear of mine and see if it has a sensor .. after it cools off and isn’t raining lol
 
The consensus is in! Hahahaha
 

Latest posts

Support Us

Become A Supporting Member Today!

Click Here For Details

Back
Top